DC POWER SUPPLY

Category:

Description

WELDING EQUIPMENT

OTC|CONSUMABLE PART|DIRECT PLUG

DC POWER SUPPLY

  • Output voltage will be automatically adjusted to DC 28.5V when input voltage is within ±10%
  • Instant start current adjusting range at 300A~2000A
  • NFB switch protects power supply and against current overload when it is overloaded or short circuit.
  • When power source’s phase failure, there will be no voltage output in order to protect load.
  • With coolant fans, protect the machine from overheating
  • Recessed design of machine body structure, allows protect front control panel board from damages.
  • Output terminal is attached to the machine and marks positive / negative & Voltage
  • Individual breakdown, Input & Load lamps display on the control panel
  • Flat top design of the machine makes it convenient to gather all devices in one place while operation.
  • ㄇ shape handle forms the 口 shape cable mounting bracket, along with 4 pieces of swivel & brake casters.
  • 4pieces of U shape brackets are included at two sides of the machines, helping cable mounting use.
  • Hanging shackle is included at the center of the machine
  • Nameplate contains date of manufacture attached to the control panel & WARN/SAFETY notice are marked in the machine
  • Male plug & female socket are included in the power input cable.
  • 2 pieces of 20 feet of power cord is included in the output terminal; that includes a 3-pin AT3 input plug.